Sinochem
CASE polyether polyols
CASE polyether polyols are applied in polyurethane waterproof coatings, adhesives, elastomers,
sports paving materials and high-speed railway infrastructure, etc.
Product consultation:
Mr. Sun 158 5336 139
CASE polyether polyols
DL-1000D
Low-unsaturation polypropylene oxide polyether diol, ultra-low moisture content, suitable for CASE series of products, which can improve the tensile strength, elongation, etc. of the products. It can also provide low odor and low VOC products DL-1000D (H), DL-2000D (H), DL-3000D (H), and DL-4000D (H).
Technical Specification
DL-2000D
Low-unsaturation polypropylene oxide polyether diol, ultra-low moisture content, suitable for CASE series of products, which can improve the tensile strength, elongation, etc. of the products. It can also provide low odor and low VOC products DL-1000D (H), DL-2000D (H), DL-3000D (H), and DL-4000D (H).
Technical Specification
DL-3000D
Low-unsaturation polypropylene oxide polyether diol, ultra-low moisture content, suitable for CASE series of products, which can improve the tensile strength, elongation, etc. of the products. It can also provide low odor and low VOC products DL-1000D (H), DL-2000D (H), DL-3000D (H), and DL-4000D (H).
Technical Specification
DL-4000D
Low-unsaturation polypropylene oxide polyether diol, ultra-low moisture content, suitable for CASE series of products, which can improve the tensile strength, elongation, etc. of the products. It can also provide low odor and low VOC products DL-1000D (H), DL-2000D (H), DL-3000D (H), and DL-4000D (H).
Technical Specification
DL-6000D
Low-unsaturation polypropylene oxide polyether diol, ultra-low moisture content, suitable for CASE series of products, which can improve the tensile strength, elongation, etc. of the products. It can also provide low odor and low VOC products DL-1000D (H), DL-2000D (H), DL-3000D (H), and DL-4000D (H).
Technical Specification
DL-8000D
Suitable for the preparation of silane modified polyether rubber, and the high ductility elastomers and adhesives.
Technical Specification
DL-12000D
Suitable for the preparation of silane modified polyether rubber, and the high ductility elastomers and adhesives.
Technical Specification
ED-28
High activity polyether polyol, suitable for the preparation of footwear materials, which can improve the elongation at break and curing speed of materials.
Technical Specification
MN-3050D
Suitable for CASE series products, which can effectively improve the tensile strength of products. It can also provide low odor and low VOC product MN-3050D(H).
Technical Specification
PPG-4000
low odor and low VOC, especially suitable for the prepolymerization reaction of rubbers. Its moderate reaction activity can effectively avoid sudden polymerization caused by activity fluctuation.
Technical Specification
10LD23
Suitable for the preparation of MDI system polyurethane waterproof coating, which can effectively reduce the viscosity of coating and improve the mechanical properties of the film. The film shows an excellent acid and alkali resistance and aging resistance.
Technical Specification
10LD33
Suitable for the preparation of TDI system polyurethane waterproof coating, which can effectively reduce the viscosity of coating and improve the mechanical properties of the film. The film shows an excellent acid and alkali resistance and aging resistance.
Technical Specification
DL-1000K
KOH polyether catalyst -CASE series
Technical Specification
DL-2000K
KOH polyether catalyst -CASE series
Technical Specification
DL-3000K
KOH polyether catalyst -CASE series
Technical Specification
DL-4000K
KOH polyether catalyst -CASE series
Technical Specification
Produced By CMS 网站群内容管理系统 publishdate:2025-10-29 14:21:56